Compu-TTY KBS300RX Manuel d'instructions

INSTRUCTION MANUALKA300TX / KA300RX / KBS300RXAlarm MonitorKA300TX / KA300RX / KBS300RXAlarm Monitor

KA300TXUses 3VDC, CR2032 battery and it will be installed by the manufacturer.KA300RXUses alkaline 9V battery. Do not use rechargeable batteries.KBS30

The operation code is set by DIP-switches located in the front of the KA300TX trans-mitter, and they are preset at the factory. If your KA300RX recei

MOUNTING THE KA300TX ON THE EXISTING ALARMUse the self adhesive Velcro to attach the KA300TX to the siren of the existing alarmunit. Do not block the

MOUNTING THE KA300RX ON THE WALLThe adapter of the KA300 is supplied with a nine feet line cord for installation to anormal outlet box. KBS300RX BED S

BED SHAKER LED INDICATOR1 Main LED: • Turns ON when there is a channel triggered by an alarm in the system. • Low flashing when there is AC power fail

• Install the KA300TX on the existing sensors and KA300RX on the wall.• Perform a test on each KA300TX,USING ALARM MONITOR WITH WEATHER ALERT RADIO.•

TESTINGIt is important to perform a test for your alarm system at least once a month to makesure the system is operating properly. You are responsible

TROUBLESHOOTING: If any question should arise during the installation and testing, follow through the fre-quently asked questions below. Contact Compu

Working Frequency...433MHzTransmitter codes ...

ImportantWarrantyCompu-TTY, Inc. warrants that the Alarm Monitor sold by Compu-TTY, Inc. is free fromdefects in materials and workmanship under normal

3408 Indale Road, Fort Worth, TX 76116Voice or TTY: (817) 738-2485 or (817) 738-8993Fax: (817) 738-1970E-mail: [email protected]: (800) 366-9950

CONTENTSi. Introduction...iiii. KA300 System...

i. INTRODUCTIONThe alarm Monitor KA300 is developed to bridge the gap created by the existingwarning devices designed only for the hearing. It provide

ii. KA300 SYSTEMKA300RXreceiverKBS300RX with bed shakerKA300TXKWA300TX STROBEADAPTER INDICATORBATTERY LOWINDICATORLOUDSPEAKERMODESELECTORCHANNEL LEDSP

ALARM MONITOR KA300 WORKSKA300system is designed to monitor all existing acoustic alarm units in your livingarea and transfer it to a visual and vibra

Example:There are 4 smoke alarms and 3Carbon Monoxide alarms thatneed to be monitor in your house-hold. You will need sevenKA300TX transmitters. Allse

Keep the battery installed and turn the power switch to OFF before bringing it to thelocation. Mark on the given label for channel location as fire, m

INSTALL KA300 FORMULTI-FAMILY HOME ORHOTELThere is one hotel code appliedfor all KA300TX installed inthe hallway. The room code isapplied for each KA3